Neodymium Ring - 20 mm x 5 mm x 3 mm
Product code: 23015
Neodymium Ring - 20 mm x 5 mm x 3 mm
Product Description:
This neodymium ring magnet measures 20 mm (OD) x 5 mm (ID) x 3 mm (T).
It has a pull force of 3.8 kg. GRADE N38.
About neodymium ring magnets:
Neodymium ring magnets are used in high quality laboratory equipment including temperature/humidity control cabinets, plant growth chambers, commercial ovens, and refrigerators. The use of magnets provides opening and closures with very significant advantages over traditional fastening systems. Other fastening methods like screws, bolts, and rivets may damage the surface of the equipment. Ring magnets of moderate pull force are also used in school projects and theatrical productions. Also found in modern cabinetry secret fixing applications in retail and kitchen and bathroom renovations.
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.
Product Description:
This neodymium ring magnet measures 20 mm (OD) x 5 mm (ID) x 3 mm (T).
It has a pull force of 3.8 kg. GRADE N38.
About neodymium ring magnets:
Neodymium ring magnets are used in high quality laboratory equipment including temperature/humidity control cabinets, plant growth chambers, commercial ovens, and refrigerators. The use of magnets provides opening and closures with very significant advantages over traditional fastening systems. Other fastening methods like screws, bolts, and rivets may damage the surface of the equipment. Ring magnets of moderate pull force are also used in school projects and theatrical productions. Also found in modern cabinetry secret fixing applications in retail and kitchen and bathroom renovations.
NB: Ranges are indicative for product category, please check individual products for specic values within that range.
The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.
Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.
Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.