Neodymium Block - 19 mm x 10 mm x 1.5 mm | Center Hole

Product code: 22024

$2.68for 1 to 9 items
$2.09buy 10 to 99 itemsand save 22%
$1.81buy 100+ itemsand save 33%

Neodymium Block - 19 mm x 10 mm x 1.5 mm | Center Hole

Product Code 22024
Pull Force* 1.5 kg
Weight 2gm
Style Neodymium Block with hole
Gauss 1325
Grade N38
Coating Nickel (NiCuNi)
Direction of Magnetisation Axially magnetized
Dimensions Width:10 mm, Length:19 mm, Height:1.5 mm

Product Description:

This neodymium block magnet measures 19 mm (L) x 10 mm (W) x 1.5 mm (T), with a center hole measuring 3 mm. It has a magnetic flux of 1325 Gauss and a pull force of 1.5 kilos. The hole allows the magnet to be easily nailed into position. GRADE N38.

About this block magnets:

This magnet with a center hole is perfect if you need to be able to nail it firmly into position. We supply these strong magnets to manufacturers, hobbyists, security firms, health specialists, industrial designers, and product development companies.

NB: Ranges are indicative for product category, please check individual products for specic values within that range.

The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.

Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.

Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.

Product Description:

This neodymium block magnet measures 19 mm (L) x 10 mm (W) x 1.5 mm (T), with a center hole measuring 3 mm. It has a magnetic flux of 1325 Gauss and a pull force of 1.5 kilos. The hole allows the magnet to be easily nailed into position. GRADE N38.

About this block magnets:

This magnet with a center hole is perfect if you need to be able to nail it firmly into position. We supply these strong magnets to manufacturers, hobbyists, security firms, health specialists, industrial designers, and product development companies.

NB: Ranges are indicative for product category, please check individual products for specic values within that range.

The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.

Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.

Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.