Neodymium Pot Magnet - 12 mm | Male Thread

Product code: AMFYPC12

$1.28for 1 to 9 items
$1.16buy 10 to 99 itemsand save 9%
$1.03buy 100+ itemsand save 19%

Neodymium Pot Magnet - 12 mm | Male Thread

Product Code AMFYPC12
Pull Force* 3.2 kg
Weight 5gm
Style Neo Pot Male Thread
Coating Nickel (NiCuNi)
Direction of Magnetisation Axially magnetized thru the 5 mm

About neodymium pot magnets:

Neodymium pot magnets, also called cup magnets, provide much stronger holding power than ceramic cup magnets. This versatile mounting magnet magnet has a strong neodymium magnet embedded inside a Nickel coated steel cup for maximum holding power. The steel cup offers protection for the magnet and concentrates the magnetic force on one side. This pot magnet has a male threaded stud which can be put through a hole and fastened with a washer and nut. Neodymium cup magnets are widely used in commercial and industrial applications.

ModelNo. M H h Pull force (kg) Weight (g)
AMFYPC10 10 3 12 5 2.2 3.5
AMFYPC12 12 3 13 5 3.2 5
AMFYPC16 16 4 13 5 5.5 7.5
AMFYPC20 20 4 15 7 9 16
AMFYPC25 25 5 17 8 22 30
AMFYPC32 32 6 18 8 34 45
AMFYPC36 36 6 18 8 41 57
AMFYPC42 42 6 & 8 20 9 68 84
AMFYPC48 48 8 21.5/24 11.5 81 130
AMFYPC60 60 8 30 15 113 254
AMFYPC75 75 10 34 15 164 550

NB: Ranges are indicative for product category, please check individual products for specic values within that range.

The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.

Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.

Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.

About neodymium pot magnets:

Neodymium pot magnets, also called cup magnets, provide much stronger holding power than ceramic cup magnets. This versatile mounting magnet magnet has a strong neodymium magnet embedded inside a Nickel coated steel cup for maximum holding power. The steel cup offers protection for the magnet and concentrates the magnetic force on one side. This pot magnet has a male threaded stud which can be put through a hole and fastened with a washer and nut. Neodymium cup magnets are widely used in commercial and industrial applications.

ModelNo. M H h Pull force (kg) Weight (g)
AMFYPC10 10 3 12 5 2.2 3.5
AMFYPC12 12 3 13 5 3.2 5
AMFYPC16 16 4 13 5 5.5 7.5
AMFYPC20 20 4 15 7 9 16
AMFYPC25 25 5 17 8 22 30
AMFYPC32 32 6 18 8 34 45
AMFYPC36 36 6 18 8 41 57
AMFYPC42 42 6 & 8 20 9 68 84
AMFYPC48 48 8 21.5/24 11.5 81 130
AMFYPC60 60 8 30 15 113 254
AMFYPC75 75 10 34 15 164 550

NB: Ranges are indicative for product category, please check individual products for specic values within that range.

The most common coating for Neodymium magnets is Nickel + Copper + Nickel (Ni + Cu + Ni). This coating offers the magnet relatively good protection from corrosion and passive applications. If the magnet will be exposed to moisture or liquid then consider the use of an organic coating such as Epoxy. A hard wearing coating, Epoxy is suited to applications where the magnet will come under some friction or knocking.

Magnets are readily available in Blocks, Discs, Cylinders & Rings. AMF Magnetics specializes in the supply of short-run prototype magnets including Arc Segments, various magnetic orientations etc. If you need a magnet size that we don't carry in stock, submit a Design-a-Magnet enquiry for a quote on your custom magnet design.

Neodymium magnets are offered in several different grades. The first section N30-54 has an operating temperature of up to 80 degrees. Most of our stock only goes up to N38. The second section, denoted with the "M" prefix after the grade has an operating temperature 100 degrees. After this the grades are "H", "SH", "UH" & "EH". In order for the magnet to withstand a higher operating temperature, during production more of the raw material PrNd is incorporated as these elements have a naturally occurring resistance to high temperatures.